Getting it right when it comes to placing your baby monitor in the right spot can make all the difference for both safety and getting the best view of your tiny human.
Too low or too close, and cords can become a hazard. Too high or blocked, and you might miss crucial moments.
In this guide, I’m going to share my list of safe and creative baby monitor mounting ideas so you can keep an eye on your little one without compromising safety.
TL;DR: Baby Monitor Mounting Ideas:
- Wall mount: The most secure and safest overall baby monitor mounting option.
- Upper corner: Offers wide view, great for small nurseries.
- Put it on a high shelf: No drilling, easy to adjust.
- Top of tall dresser/bookcase: This setup works if fully stable.
- Ceiling mount: Best mounting option full crib view, permanent setup.
- Tripod/stand: This is a flexible, short-term solution.
- Keep the baby monitor at least 3 feet from the crib and lock down all cords.
Where To Put Baby Monitor (The 5 Most Common Mounting Options):
First off, it’s important to note that there isn’t one “perfect” spot for every nursery where you can place your baby monitor.
The best choice depends on your room layout, the type of monitor you have, and how permanent the setup is.
From my own experience setting up different monitor units, I can assure you that this is what matters the most: A clear view, a stable mount, and zero safety risks.
Let’s walk through the most common baby monitor mounting options and when each one makes sense…
#1. Wall Mounting Baby Monitor
Wall mounting is one of the safest and most reliable ways to place a baby monitor, especially for video monitors. It’s also perfect if you’re looking for a permanent setup.
Using a proper baby monitor mounting bracket allows you to position the monitor well above crib height, usually 4 to 6 feet from the floor, angled downward toward the center of the crib.
That downward angle gives you a full view of your baby’s sleep space without placing anything directly above them.
How To Mount A Baby Monitor on The Wall Step-by-Step:
Step 1. Choose a wall at least 3 feet away from the crib.
Step 2. Hold the monitor mount about 4 to 6 feet from the floor.
Step 3. Angle it slightly downward toward the center of the crib. Be sure to angle the camera slightly downward, not straight across.
Step 4. Mark the screw hole positions with a pencil.
Step 5. Drill the pilot holes and insert the wall mount for baby monitor (if needed).
Step 6. Secure the mount firmly with screws.
Step 7. Now attach your monitor and adjust the viewing angle.
Step 8. Run the cord straight down the wall and secure it with cord clips.
Before you finish up, gently tug the mount to confirm it does not shift.
Additional Mounting Tips:
- Use proper screws and anchors, especially if you’re mounting the monitor into drywall
- Do not rely on weak adhesive mounts for heavier monitors
- Avoid placing your baby monitor where direct sunlight hits the lens, since glare can ruin its night vision clarity
If you want long-term stability and maximum safety, consider wall mounting your unit.
Why Parents Love This Option:
- Keeps the monitor completely out of reach
- Provides a stable, consistent viewing angle
- Frees up dresser and shelf space
- Harder for toddlers to tamper with later
From experience, once you mount your baby monitor correctly on the wall, you rarely need to adjust it again. It becomes a “set it and forget it” solution.
#2. Shelf Placement
High shelf placement is an ideal option if you’re looking for a flexible option or if you are renting and cannot drill into walls.
In this case, you place your monitor on a sturdy shelf or tall dresser. This placement works well as long as you place your shelf high enough (5 to 7 feet high) and secure.
How To Put Baby Monitor On Shelf Step-by-Step:
Step 1. First, you’ll need to choose a high, stable shelf (5 to 7 feet high) at least 3 feet from the crib.
Step 2. Ensure the shelf is sturdy or anchored to the wall.
Step 3. Place the monitor toward the back of the shelf, not near the edge.
Step 4. Angle the camera toward the crib and test the view.
Step 5. Once you find a suitable position, secure the cord tightly along the wall using clips.
Step 6. Make sure no cord hangs down within reach.
Safety Tips To Keep In Mind:
- Make sure the monitor cannot be accidentally knocked off
- Keep cords secured tightly along the wall
- Never place the baby monitor on a wobbly piece of furniture
- Avoid placing your monitor near a direct light source, as this can lead to glare that affects your view.
One thing I always tell parents: If you can bump the shelf and it shifts, it is not stable enough. The last thing you want is a monitor falling into the crib.
Why Shelf Placement Works:
- Easy to reposition if needed
- No drilling required
- Good for testing different angles before committing to a permanent mount
That said, I advise you to pay attention to extra attention to stability if you choose to go with this setup.
#3. Furniture-Mounted Options
Some parents choose to place the monitor on top of tall furniture like a bookcase or a changing table. This can work too, but you need to think ahead.
Furniture placement can seem convenient at first, especially during the newborn stage when your baby isn’t moving much.
But babies grow quickly. What is out of reach at 3 months may not be out of reach at 9 months.
Baby Mounting Furniture Mounting Step-by-Step Guide:
Step 1. Select tall furniture that feels sturdy and secure. If the furniture wobbles even slightly, choose another option.
Step 2. Confirm it is at least 3 feet from the crib.
Step 3. Place the monitor far back from the front edge of the furniture.
Step 4. Adjust the camera angle to clearly see the crib mattress.
Step 5. Finally, secure the cords tightly behind the furniture and along the wall.
When This Option Works Well:
- The furniture is tall and sturdy or anchored to the wall
- The monitor sits far enough back from the edge
- The cords are fully secured and inaccessible
What To Avoid:
- Placing the monitor directly on the crib. Some people recommend attaching the monitor to the crib, but I wouldn’t recommend this.
- Letting cords hang down behind crib bars
- Using unstable or lightweight furniture
As a general rule, nothing should ever overhang the crib or bassinet (yes, I keep getting the question: where to put baby monitor bassinet). Even lightweight items can become hazards if they fall.
#4. Ceiling Mounting (Advanced Option)
As you can easily picture, ceiling baby monitor mounting ideas provide a full top-down view of your baby’s crib. Some parents love the clean, centered look this mounting style offers.
This setup gives you a complete view of your baby’s sleep space without blind spots. It is especially helpful if you want to monitor sleep movement patterns clearly.
How To Ceiling Mount Your Baby Monitor Step-by-Step:
Step 1. Identify a ceiling joist location that allows for secure anchoring.
Step 2. Position the baby monitor mount directly above the crib center, but NOT directly over your baby’s head.
Step 3. Mark the drill points and then drill pilot holes.
Step 4. Secure the mount firmly into the joist.
Step 5. Attach your monitor camera and adjust it to a downward angle.
Step 6. Route the cord along the ceiling edge and down the wall using clips.
IMPORTANT: Double-check the stability of the camera before placing the baby in the crib.
Pros:
- Full crib visibility
- No furniture space used
- Completely out of the baby’s reach
Cons:
- Requires proper installation
- Harder to reposition later
- May involve drilling into ceiling joists
This option works best if you are confident with installation or hiring someone who is. A poorly installed ceiling mount is NOT worth the risk.
If done properly, though, it provides you with one of the clearest views possible.
#5. Use A Tripod or An Adjustable Stand
Tripods and flexible stands are a popular way of setting up baby monitors due to their convenience and portability. A baby monitor stand allows you to move your monitor easily between rooms or reposition it as needed.
This is especially helpful if your baby naps in different areas of the house and for easy temporary or travel setups.
How To Set Up Baby Monitor On A Stand Step-by-Step:
Step 1. Place the baby monitor stand or tripod at least 3 feet from the crib.
Step 2. Extend the stand legs fully for maximum stability.
Step 3. Adjust your camera height to 4 to 6 feet if possible.
Step 4. Next, angle the camera so that it points toward the crib center.
Step 5. Secure the camera cord along the wall and away from walking paths.
Step 6. Test stability by gently pushing the tripod. If it tips easily, reposition or switch to a mounted solution.
This setup is beneficial because it’s highly adjustable, portable, and requires no permanent installation.
But here is where you need to be careful: Tripods can easily tip if bumped. As your baby becomes more mobile, anything within reach becomes a potential pull hazard.
Safety Tips To Keep In Mind:
- Choose a tripod with a wide, sturdy base
- Keep it well away from the crib
- Secure cords tightly against walls
- Never place it close enough that your baby could grab it
Personally, I see tripods as a short-term or travel solution rather than a permanent nursery setup.
Creative Baby Monitor Placement Ideas To Consider:
Having gone through the 5 most common mounting options, you might ask: “Okay, but what works in my actual room?”
And I really get it…
Nursery rooms are laid out differently. Some rooms are tiny. Some have awkward windows. Some have cribs tucked into corners.
In these cases, getting a little bit creative with your monitor placement ensures full crib visibility without creating a safety risk or cluttering the room.
Here are creative ideas on where to put baby monitor:
1. Corner Placement
Mounting a baby monitor in the upper corner of the room is one of the most underrated setups.
By placing the camera high in the corner and angling it diagonally toward the crib, you can often see your little one’s entire sleep space without blocking windows, shelves, or wall décor.
Why This Placement Works:
- Wide viewing angle
- Keeps the monitor completely out of reach
- Reduces blind spots
- Keeps walls above the crib clear
From experience, corner placement is especially helpful in small nurseries where wall space is limited. It gives you a full view without feeling like the camera is hovering directly over your baby.
Just make sure it is high enough and angled downward properly. A slight tilt makes a big difference in coverage.
2. Doorway Angle
This is a clever option that many parents overlook. If you mount your monitor high on the wall opposite the crib, angled slightly toward the doorway, you can see both your baby and the room entry.
Why that matters:
- You can see if a sibling wanders in
- You can monitor the door during naps
- You get a better sense of the whole room
This setup works especially well in shared rooms or homes where older kids might enter the nursery.
The key here is to ensure the crib remains the main focal point. In this setup, the doorway view is a bonus, not the priority.
3. Behind The Changing Station
If your changing table is positioned against a wall opposite the crib, this can be an ideal mounting location.
Installing the monitor slightly above and behind the changing station keeps it elevated and usually out of reach. It also allows the camera to capture a clean, centered view of the crib.
Why Parents Like This Option:
- Uses existing furniture height
- Keeps the monitor discreet
- Makes good use of wall space
That said, you should be mindful of future mobility. Babies grow into toddlers quickly. If the changing station becomes a climbing zone later, you’ll need to reconsider your placement.
4. Nursery Décor Integration
Some parents prefer a softer look and want the monitor to blend into the nursery rather than stand out.
If that sounds like you, then you can place your unit on a high shelf among books or neutral décor pieces, as long as safety comes first.
If you go this route:
- Ensure the shelf is secure and anchored
- Make sure the monitor cannot be bumped off
- Keep cords fully managed and hidden
- Avoid placing the monitor near hanging décor
Overall, a monitor that blends into your nursery room can look clean and intentional. But never sacrifice stability for aesthetics.
Safety Guidelines For Mounting A Baby Monitor
Observe these safety guidelines for the safest mounting of your baby monitor:
- Always mount the baby monitor at least 3 feet away from the crib to prevent cord or reach hazards.
- Keep all the wires tightly secured along the wall using cord covers or clips.
- NEVER place your baby monitor inside, on, or directly over the crib.
- Make sure the baby monitor mount is stable and cannot be bumped loose or fall. As a general rule of thumb, you should consider anchoring all your heavy furniture to the wall as a nursery safety practice. (Source).
- Avoid positioning your monitor near heat sources, humidifiers, or windows with direct sunlight.
- Regularly check that the baby monitor mounting bracket, screws, and cords remain secure.
Safe placement should eliminate all potential fall risks, strangulation hazards, and blind spots while giving you a clear view of your baby.
DIY Mounting Hacks For Your Baby Monitor
If you are not ready to drill into the wall, I still have a few DIY options that can work for you (as long as safety stays the priority).
Let’s quickly walk through these options below:
Make Use of Wall hooks and adhesive mounts
These can hold lightweight monitors and are easy to reposition. These are helpful in rentals or when you are still testing angles. Just make sure the adhesive is rated for the monitor’s weight and placed on a clean, smooth surface.
Command trips for Mounting Lightweight Monitors
Command trips are another temporary solution. They work best for small, compact cameras, but they should never replace proper screws for heavier units. Always test the hold before placing the monitor near the crib area.
Mount With Shelf brackets
You can install these above the crib height to create a stable platform. This gives you flexibility to adjust the angle while keeping the monitor secure.
No matter which method you choose, never trade stability for convenience. Secure mounting and safe cord management should always come first.
Factors To Consider Before Mounting A Baby Monitor
Before choosing where to put baby monitor, keep these points in mind:
- Height and Angle: Your monitor should capture the crib or bassinet clearly without blind spots.
- Distance from Baby: Keep all your monitor cords, plugs, and monitor bodies out of reach.
- Power Source: Depends on whether you’re using a plug-in monitor or a battery-operated option.
- Signal Strength: Ensure that your Wi-Fi or wireless monitor has a good reception.
- Lighting and Glare: Avoid direct sunlight hitting your video monitors for a clear view.
Baby Monitor Mounting FAQs:
Let’s take a look at some of the most asked questions on where to place a baby monitor:
How far should a baby monitor be from a baby?
A baby monitor should be placed at least 3 feet away from the crib or bassinet. This distance helps prevent cord entanglement and keeps the device safely out of reach. Even wireless cameras often have power cords, so always secure wires tightly and ensure your baby cannot grab or pull them.
How do you mount baby monitor on wall without drilling?
To monitor your baby monitor on the wall without drilling, you can use heavy-duty adhesive mounts or strong command strips designed to hold the monitor’s weight. Clean the wall surface first and press firmly for a secure bond. This works best for lightweight cameras. Always test stability before positioning it near the crib area.
What is the best way to mount a baby monitor?
The safest and most reliable method is using a proper wall mount with screws and anchors. This keeps the monitor stable, elevated, and completely out of reach. Set the camera angle downward to ensure you enjoy a full crib view and secure all cords tightly along the wall.
How do you mount a baby monitor without drilling?
Use adhesive wall mounts, flexible clamp mounts, or a tall, stable shelf positioned well above crib height. Make sure the monitor cannot slide or tip. Secure all cords with clips or covers. If the monitor feels loose or unstable, choose a more secure method.
How do you mount monitors that don’t have mounting holes?
If the baby monitor lacks mounting holes, you can use a universal baby monitor mount, flexible clamp, or small shelf to mount it securely. Some parents use adjustable brackets designed to hold cameras in place. I’d advise you to avoid makeshift solutions that could slip. Stability and proper cord management are essential.
How high should a baby monitor be mounted?
Mount your baby monitor about 4 to 6 feet high from the floor and angle it downward toward the center of the crib. This height provides a clear view while keeping the device out of reach. Always maintain at least 3 feet of distance from the crib itself.
Conclusion
Proper baby monitor placement ensures your baby’s safety, the best monitoring experience, and gives you peace of mind. You can choose from a variety of placement options, including a wall mount, shelf, tripod, or ceiling mount, etc.
Whatever mounting idea you choose, always follow cord safety rules, keep the monitor stable, and make sure you can see or hear your baby clearly. Once you find where to put baby monitor, you can now focus on enjoying time with your little one, knowing you’re keeping them safe.